Being Water's 3/4" FLOATING INTAKE FILTER for collecting the cleanest available water in your Rainwater Storage Tank, Cistern or Rain Barrel.

Being Water's 3/4" FLOATING INTAKE FILTER for collecting the cleanest available water in your Rainwater Storage Tank, Cistern or Rain Barrel. Feature

• Filter floats a few inches below the water surface to always pull the cleanest water available.
• New swing check valve design is suitable for both pressure and gravity siphon water systems.
• Eight foot long No-Kink, Smooth-Wall intake hose assures trouble free operation for years.
• Four different sizes for a variety of installation scenarios.
• 3/4" model suitable for water draw of up to twelve gallons per minute.

Being Water's 3/4" FLOATING INTAKE FILTER for collecting the cleanest available water in your Rainwater Storage Tank, Cistern or Rain Barrel. Overview

Being Water's Floating Intake Filter is used to pull the cleanest available water in the storage tank or cistern by resting several inches below the surface. This is important because sediment sinks to the bottom and debris floats on top. The floating Intake filter accepts water in the stainless steel filter, then through the low friction smooth wall flexible piping and exits through the swing style check valve on it's way to the watering system. The check valve is positioned at the tank wall in a vertical position so that it functions correctly whether there is a pressure system incorporating a pump or a gravity system that uses the siphon principle. The screen always stays submerged under water unless the tank is emptied. Once the water level gets within an inch of the bottom of the tank, air will enter the valve and any water contaminated with sediment will not be drawn into the system. This is very important if the water system is being used for irrigation where small emitters that could become easily plugged are used or, if the water is being sent to secondary filtration for further cleaning. Available in four sizes, Being Water's Floating Intake Filter is very versatile. There is a size available for your particular need. The 1/2"or 3/4" units are perfect for rain barrels or tanks that don't have a large demand. The 1" and 1-1/2" models can be used comfortably to supply a large irrigation system or residence. Check the product specifications for each model to see which one is right for you.

RelateItems

• Being Water's RAIN FLUSH FIRST FLUSH DIVERTER KIT for Separating the Initial Dirty Rain From the Clean Rainwater on It's Way to a Rainwater Harvesting System or a Single Rain Barrel
• SHURflo 255-313 Classic Series Twist-On Strainer (1/2" FPT x 1/2" )

Check Price Now!

Lowest Price Guarantee and FREE with Super Saver Shipping.